Painted the oil sump, installed the flywheel, friction plate and pressure plate. Fitted the new steering damper, it will need further adjustment later when the car is running.

Spent a couple of hours cleaning the sump ready for paint

Looks much better black

Put the flywheel back on, some lock tight and instant gasket on the bolt and done up to 80Nm

Made a tool for aligning the friction plate when fitting the pressure plate. Small end goes into spigot bearing.

Old VS New steering damper. New one is a "return to centre"

New stuff looks cool

This is part of my rusted cooling system, the small bit goes to the heater. Need to find a new one or possibly make one